INDUSTRIAL, COMMERCIAL & RESIDENTIAL TURNKEY SOLUTIONS

Waste Energy Recovery System (WERS) Facility

Our unique facility was developed to provide an end-to-end solution to our waste needs.. It is a particularly versatile solution because the components can be provided in a wide range of shapes and sizes without compromising the efficacy and efficiency of the overall system. Facility sizes range (1-10,000 ton/day and more) Our facilities are tailored to extract salable commodities such as synthetic fuels, electricity, clean water and construction grade ash. This allows waste to be thought of as a revenue and not a liability.


WERS technology offers the potential for substantial recovery of energy from all manner of waste materials. This process should not be confused with the term “Energy From Waste“ where incineration plants merely use part of the heat generated from their process as a  means of recovering small amounts of energy. WTTEC uses all waste matter as a raw material in a conversion process that produces an energy rich gas stream. Different materials need to be treated in different ways in order to produce the best possible gas stream and our unique process can vary and control process conditions, in order to enable us to optimize the many factors affecting the final product. WITHOUT SEPARATION.


OUR FACILITIES ARE NOT RELIANT ON THE CURRENT INFRASTRUCTURE GRID. Only a small amount of power is needed to cold-start the facility, after which, we run on our own production gases and remain off-grid.

WERS facility
WERS facility

EMISSIONS

Our groundbreaking facility is an entirely closed process. Nothing is released to atmosphere and no materials are combustive  as  part of our process. Every last molecule of gas is captured in readiness for re-use in the production of energy.

The Gas output is carefully managed and conditioned at various stages of the process. This enables us to maximize both the volume and energy content of the gas according to each individual feed-stock. From the point at which waste matter is converted into gas, we apply  five distinct process phases in order to improve and condition the gas, thereby maximizing the opportunity to produce renewable energy.


Dioxins, Furans, Nitrous Oxides and Sulfurous Oxides are all products of combustion. Our process utilizes a portion of the feed-stock in order to convert the waste matter into an energy rich gas, therefore none of the harmful emissions normally associated  with thermal destruction processes apply to WTTEC’s unique facility.


Our gas streams are cleaner, more manageable and offer a higher energy content than any other systems currently available in the field of recovery and treatment of waste. The potential for any gas to produce energy is measured in terms of its calorific value (CV). The following tables and graphs illustrate the potential energy value typically available from WTTEC’s gas streams and compare the equivalent calorific value of gas outputs from the leading environmental technologies, many of which are only now beginning to become available.

emissions
emissions

WHAT CAN BE PROCESSED

ANY WASTE, Wet or Dry!

  • ALL plastics. There are NO limitations!
  • Household Trash, All Paper, Wood and bio-waste.
  • Light Bulbs, Computers, TVs, All types of E-Waste
  • Construction/Demolition  Materials, Including concrete 
  • Rubber/Tires, All Sized Batteries, Insulation and Styrofoam
  • Industrial Waste and ALL Hydrocarbon based products
  • Medical Waste: Needles,  Scalpels, Infectious  Materials
  • Paint Cans, Soda Cans, All  Other Aluminum
  • Photo-voltaic cells (solar panels)

VIRTUALLY NO LIMITATIONS!

waste site
waste site

CONVERTING SYN-GAS TO MULTIPLE BIO-FUELS

THE WERS FUEL ADVANTAGE

Higher output- With our patented use of technology, we have increased the output to produce high-quality fuels at the rate of consumption needed today.


NO Sulfur- WERS facilities comply with many regulations that are coming into effect now or in the future. We are ahead of the curve with providing already compliant, sulfur-free fuels.


Lower OPEX costs- There are numerous advancements to the technologies involved in created our high-quality fuels. All of which come down to lowering OPEX costs, reduced downtime and increase production volume.


Compact- Each unit consists of two standard size shipping container, making for easy transport and placement. 


Multi-faceted- Using our patented technology built in, we can select from 37  different types of fuel. Such as aviation fuel, marine oil, heating oil, Ng, LPG, etc.


Scalability-  Our facilities are only limited by the feed-stock provided. Which provides us with no limitations on what can be accomplished.


Zero emissions- WERS is a closed loop system. Even during opening during maintenance, the system is under a vacuum and does not let any contaminates leave. A truly Zero-emission system.


Modular- Units are built to meet the output. If the output increases, additional units can be added to compensate.


Our WERS facilities can be built to suite individual fuel needs or produce MULTIPLE fuels, in parallel, using the same feed source.


The facility size and output is sized on the feed-stock and desired outcome of the client.

syn-fuel setup
syn-fuel setup

OUR UNIQUE PROCESS CAN PRODUCE A WIDE RANGE OF HIGH-QUALITY FUELS FOR OUR EVER-CHANGING NEEDS.

different fuels

REVENUE STREAM FROM WASTE

revenue streams

HIGH OUTPUT + HIGH QUALITY PRODUCTS + LOW OPEX = HIGH REVENUE STREAM